Environmental Compliance & Green NOC

Ensuring your manufacturing, warehousing, healthcare, or hospitality business operates in full compliance with the Water Act 1974, Air Act 1981, and Central Pollution Control Board (CPCB) mandates.

Highlights

  • Consent to Establish (CTE) & Consent to Operate (CTO)
  • Extended Producer Responsibility (EPR) Registration
  • Plastic Waste Management (PWM) Portal Compliance
  • Hazardous, Bio-Medical & E-Waste Authorisation

Services in Environmental Compliance & Green NOC

Consent to Establish (CTE) Assistance

Preparing environmental engineering plans, water balance diagrams, and site clearance applications for State Pollution Control Board (SPCB/DPCC) CTE grant.

  • Who needs this: Any new industrial setup, manufacturing plant, cloud kitchen, hotel, automotive workshop, or warehouse before starting civil construction.
  • Typical timeline: 15–30 Business Days
  • Deliverables: Industrial classification assessment (Red/Orange/Green/White); Effluent Treatment Plant (ETP) / STP layout review; CTE grant certificate from State Pollution Control Board

Consent to Operate (CTO) Assistance

Post-construction operational clearance verifying pollution control equipment, emission standards, stack height, and hazardous waste storage before trial run.

  • Who needs this: Operational factories, commercial laundry units, food processing centers, and hospitals ready to start manufacturing or trade.
  • Typical timeline: 15–25 Business Days
  • Deliverables: Ambient air & stack emission report review; Water and wastewater discharge compliance verify; CTO formal grant letter with specified validity period

Extended Producer Responsibility (EPR) for Plastic Packaging

Mandatory CPCB portal registration for Brand Owners, Producers, and Importers (PIBOs) under Plastic Waste Management Rules 2016.

  • Who needs this: Any enterprise importing packaged items, using plastic carry bags, laminated pouches, or rigid plastic packaging.
  • Typical timeline: 7–14 Business Days
  • Deliverables: CPCB Central EPR Registration Certificate; Target calculation for Category I, II, III & IV plastics; Annual EPR return filing assistance

E-Waste & Battery Waste EPR Authorization

Authorisation from Central Pollution Control Board for manufacturers and importers of electronic goods, lithium-ion, and lead-acid batteries.

  • Who needs this: Importers and producers of consumer electronics, computers, IoT devices, solar inverters, and EV batteries.
  • Typical timeline: 10–20 Business Days
  • Deliverables: CPCB EPR portal dossier preparation; Recycler tie-up documentation format; E-waste target compliance certificate

Hazardous Waste & Bio-Medical Waste Authorization

Assistance in obtaining Form 1 statutory authorization under Hazardous & Other Wastes Rules 2016 from SPCB.

  • Who needs this: Chemical manufacturers, paint workshops, plating units, diagnostic centers, and clinics generating regulated wastes.
  • Typical timeline: 12–20 Business Days
  • Deliverables: Form 1 filing with SPCB; Standard operating procedure for on-site containment; Annual return (Form 4) submission guide

Annual Environmental Audit & Statement (Form V)

Computation of water consumption, raw material ratios, and pollution loads to file the mandatory annual Environmental Statement before September 30.

  • Who needs this: All operating units holding valid CTO from SPCB under the Environment (Protection) Act, 1986.
  • Typical timeline: 5–10 Business Days
  • Deliverables: Form V preparation & environmental audit report; Resource efficiency and waste reduction recommendations; SPCB stamped acknowledgment receipt

Documents usually required

  • Site plan showing production area, DG set, effluent treatment plant, and storage
  • Water balance chart detailing daily domestic and industrial water consumption
  • Detailed manufacturing process flow diagram and material balance
  • Capital investment certificate on plant & machinery (CA certified)
  • Electricity connection sanction letter or DG set installation approval

Process

  1. Classification & Indexing — Determine your enterprise pollution index (Red, Orange, Green, or White) according to CPCB revised guidelines.
  2. Engineering & Plan Assembly — Compile pollution control device specifications, water balance charts, and environmental management plans.
  3. SPCB / CPCB Portal Lodgment — Submit digital applications via state OCMMS (Online Consent Management System) or CPCB portal with requisite state inspection fees.
  4. Inspection & NOC Delivery — Assist during departmental technical inspections, respond to queries, and obtain the formal CTE / CTO certificate.

Practitioner tip

Industrial units categorized under Red, Orange, Green, or White classifications must secure Consent to Establish (CTE) prior to civil construction and Consent to Operate (CTO) prior to manufacturing. Operating without a valid CTO can lead to closure directions and penalties under the Water and Air Acts.

Frequently asked questions

What is the difference between CTE and CTO in environmental law?

Consent to Establish (CTE) is required before commencing any civil work or installing machinery. Consent to Operate (CTO) is obtained after plant installation and before starting commercial production or trade operations.

Who is required to obtain Plastic Waste EPR registration?

Under CPCB rules, every Producer, Importer, and Brand Owner (PIBO) utilizing plastic packaging (rigid, flexible multi-layer, or compostable) must register on the centralized CPCB EPR portal.

What are White Category industries?

White Category industries are practically non-polluting commercial activities (such as solar panel assembly, organic cotton cloth stitching, or bio-fertilizers). They are exempt from CTE/CTO and only require an online intimation to SPCB.

Submit an enquiry for help with Environmental Compliance & Green NOC.